Sometimes creating unique sounds using a modular synthesizer sometimes requires the signal to connect in and out of one module. The Hosa Hopscotch Patch Cables include a short pigtail with a female 3.5 mm TS jack at one end of the cable. This makes it possible to route the same output signal to two destinations. The pigtail design moves the jack far enough away from the connector--where space is limited--but close enough to identify the output to which it is connected.

Hopscotch Patch Cables feature oxygen-free copper wire, flexible spiral shielding, and nickel-plated plugs. The plugs are slim enough to use in any modular synthesizer rig without interfering with other cables or controls.

Hopscotch Patch Cables are color-coded by length. The CMM-545Y kit consists of five yellow, 1.5-foot (45 cm) cables. Or go with an assortment of lengths with the CMM-500Y-MIX kit that includes one of each of the following cables: red 6-inch (15 cm), orange 1-foot (30 cm), yellow 1.5-foot (45 cm), green 2-foot (60 cm), and blue 3-foot (90 cm).