T.C. Electronics 2290 Sampling Setup

Input: Delay = On

Feedback:
    Inv = Off
    Level = 0
    High = 0
    Low = 0

Output Volumes:
    Inv = Off
    Dly+Dir = 99
    Pan = 0
    Delay = 99
    Direct = 0

Modulation: N/A

Pan:
    Mod = Off
    Delay = Off
    Direct = Off

Dyn:
    Mod = On for audio trig
              = Off for manual

Reverse = Off

Delay:
    Mod = On for pitch shift
              = Off for normal
    Sample = On

Learn = Manual Rec & P.B.

KEY A: On = Record Ready

KEY B:
    On = Sample start point
    Off = Sample end point
--------------------------------------
Registers:

Reg	Min	Max	Def	Func.
30	1	9	2	Samp Rec Thresh
31	1	9	2	Samp P.B. Thresh
35	500 2000 1000	P.B. Pitch
36	0	32510	Max Smpl Time
38	1023 9999 1023 Max Delay Time
39				Memory Avail.
--------------------------------------
To Check Register Values:
  
	Where 'n' is the register number

To Store Register Values:
    
	Where 'n' is the register number and 'x' is the register value

To Modiy The Divison Of Memory:
1)  <38>   	Reserves 'x' seconds for delay
(1023 is minimum value.)
2)  <39>  <0> 	Reserves the rest for sampling
3)  	Initialize
4) Turn 'SAMPLE' LED on
5) Press time 'up' button until the time stops increasing

* NOTE *: If a memory board becomes loose or disconnected, the correct
amount of total memory time must be re-entered into  <7> before any
memory allocation can be performed.
=========================