|
|
Studer A-827 Cat 3 Errors (Page 2)Revised: Greg Loskorn 3/27/99 Cat 3 : Non-fatal - Operation can continue. Error messages disappear when the error has disappeared. Messages can be acknowledged by pressing STORE, even though error may still persist. -------------------------------------- Cat 3 : Non-fatal ERR: INCORRECT INERTIA Cause: The last three inertia calcs supplied incorrect values. Check for binding on motors and and rollers. Check MAX REEL DIAMETER value. -------------------------------------- Cat 3 : Non-fatal ERR: TAPE NOT IDENTIFIED ERR: MASTER NOT IDENTIFIED ERR: AUDIO NOT IDENTIFIED Cause: Unknown error Cycle power. * Re-seat RAM (IC8) on MASTER MPU 1.820.784, doing so will lose tape tension data and key programming data! -------------------------------------- Cat 3 : Non-fatal ERR: WRONG HEAD OR TAPE SORT Cause: Insufficient memory for reading in audio parameters. Reduce the audio parameters to a total of 48 channels (e.g. 24 channels tape type A+B or 24 channels + 16 channels + 8 channels, etc.) ??????? -------------------------------------- Cat 3 : Non-fatal ERR: NO DATA FOUND ON TAPE Cause: The audio data settings are not readable on tape. Check the input signal level and shape, and the tape speed. The red LED on the COMMUNICATIONS CONTROLLER 1.820.718 should be lit. (when ??) -------------------------------------- Cat 3 : Non-fatal ERR: VERIFY FAILED Cause: The audio data settings read from tape do not agree with the machine data. Re-load the data. -------------------------------------- Cat 3 : Non-fatal ERR: HEAD NOT IDENTIFIED Ursache: Maschine ohne installierten KopftrŠger eingeschaltet oder falscher Identifikationscode wird vom Head Assembly Identifier PCB 1.820.795.00 (auf dem KopftrŠger) geliefert. Behebung: KopftrŠger installieren oder Head Assembly Identifier PCB prŸfen. -------------------------------------- Cat 3 : Non-fatal WARN: REFERENCE FREQUENCY WRONG Does not attain the selected nominal tape speed in play mode. Cause: The frequency of the external varispeed reference signal is outside the valid range (6.4kHz to 14.4kHz), or the signal is missing. ========================= |
|
 |
 |
Back To Home Page
Back Up To The Top