SR-15 Set Up

Parameters for norm. reshaping ops.

DISTRIBUTOR / RESHAPER:
OUTPUT RISE TIME:  Changes the waveform of all 5 reshaped outputs.
      * SMPTE (25ms)
 Square (1ms)
 EBU (50ms)

OUTPUT LEVELS:  Full off to +12dbu.
 ~ 12:30

CODE ANALYZER:
READER SELECT: 8 digit display mode.
      * Code
 User
 Video ¯

COUNTER: 4 digit display mode.
      * Code
 Tone in
 Tone out

TONE STRIPPER:
SOURCE SELECT: Selects the input.
      * Code
 Video
 Mains

OUTPUT LEVEL: Full off to +12dbu.
 ~ 9:30

OUTPUT WAVEFORM:
 Square
      * Sine
--------------------------------------
LED's:
     "Signal In" : Input signal > -30db
     "Good Code" : Ind. 'good' code
     "Fr/Sec" : 4 digit display = f.r.
     "Hz" : 4 digit display = frequency
     "ASCII" : User Bits are in ASCII
     "Color Fr." : Color flag is set (bit 11)

"Drop Fr.":
     On solid for drop frame code
     Blinks mostly on for missing DF flag (bit 10)
     Blinks mostly off for false DF flag
     Off for non-drop

"Video Code":
     On if code is in sync. ¯ with video
     Blinks mostly on if code is out of ¯
     Blinks mostly off if code is drifting
     Off if no video is present
=========================