The Bronzewood is a 60-watt acoustic combo guitar amp with built-in reverb, XLR mic channel input with phantom powering and an instrument input jack. Weighing a little less than 40lbs., the 60 has controls for the Guitar channel that include: compressor; notch filter to eliminate feedback; phase switch; pre-amp gain; active tone controls; mid shift; and a unique Blend control to mix in the desired amount of SansAmp Tube/Microphone Emulation circuitry. This proprietary technology removes the harsh harmonics associated with piezo pickups and is said to deliver a natural warmth and presence.

The Mic channel has 3-band active tone controls, an individual level control, gain, and a separate reverb mix control to adjust the ratio of the full-length, 3-spring Accutronics reverb between the two channels. Tech 21 has included a special design 12-inch speaker and high-frequency horn inside a handsome cabinet covered in brown crocodile embossed vinyl.

The SansAmp circuitry enables the Bronzewood 60 to be run direct to the mixer of a recorder or PA system with an XLR Direct Output. Other features include a headphone output (that doubles as a 1/4" direct out should an XLR input not be available on your recorder), an effect loop, and a courtesy power outlet so you can neatly secure your effects in the back of the amp.

To remotely activate the reverb function, an optional footswitch is available. Also optionally available is a matching powered 1x12, 60-watt, open-back extension cabinet.

The U.S. suggested retail prices are $645 for the Bronzewood 60 and $395 for the extension cabinet.